Turf-Tec International, Tallahassee, Florida. USA (850) 580-4026This product is made by Turf-Tec International in the USA

ASTM Infiltration Rings

IN15-W : Turf-Tec SDRI Infiltration Rings
5 foot and 12 foot Diameters Sealed Double Ring Infiltrometer
(SDRI) for ASTM 5093

Click here to see out other infiltration devices!

The new Turf-Tec SDRI Infiltration Rings have diameters of 5 foot and 12 foot rings that match ASTM Standard D 5093-02 which replaced old ASTM D 5093-90.

The Turf-Tec SDRI Infiltration Rings are double ring for standard testing of soils with a hydraulic conductivity between 1X10-7 m/s to 1X10-10 m/s or tight soils with low infiltration rates.

The new IN15-W Turf-Tec SDRI Infiltration Rings have diameters of 5 foot and 12 foot rings that match ASTM Standard D 5093-02 which replaced old ASTM D 5093-90. These rings are for performing a Sealed Double Ring Infiltration Test or SDRI (S.D.R.I.).

The Turf-Tec Infiltration Rings are double ring for standard testing of soils with a hydraulic conductivity between 1X10-7 m/s to 1X10-10 m/s or tight soils with low infiltration rates.

They are constructed of durable aluminum outer ring and a durable steel inner ring.  The inner ring is a seam welded one piece tank to prevent leaks. The outer rings are constructed of rigid aluminum and bolted together with the aid of a rubber gasket to form a tight seal. The inner infiltration rings are also painted to prevent rust and insure a long life.  The outer rings are made from aluminum and do not require painting.

Click image to enlarge Turf-Tec IN15-W SDRI Infiltration Rings

Using the Turf-Tec SDRI Infiltration Rings for ASTM Standard D 5093-02 test method is useful for field measurement of the infiltration rate of very slow infiltrating soils. This test method is useful for measuring liquid flow through soil moisture barriers such as compacted clay liner or covers used at waste disposal facilities, for canal and reservoir liners, for seepage blankets, lake and irrigation pond areas and for amended soil liners such as those used for retention ponds or storage tanks. It is also useful in determining if a spill occurs, how the soil around the area will react. This test method is government approved and matches ASTM Standards.

The purpose of the double ring is to insure the downward flow of movement of water to insure proper measurements.  These infiltration rings are ideal for taking ASTM infiltration tests on all areas and match the ASTM 5093 test.

The IN15-W Infiltration set comes with both inner and outer rings, rubber gasket for 12 X 12 foot Infiltration rings, bolts for 12 X 12 foot Infiltration rings, 3000 ml IV bag, rubber splash guard and all necessary hoses and fitting to conduct the complete ASTM Standard D 5093-02 test.The IN15-W Infiltration set comes with both inner and outer rings, rubber gasket for 12 X 12 foot Infiltration rings, bolts for 12 X 12 foot Infiltration rings, 3000 ml IV bag, rubber splash guard and all necessary hoses and fitting to conduct the complete ASTM Standard D 5093-02 test for the Sealed Double Ring Infiltration Test or SDRI
.
The inner ring of the IN15-W Turf-Tec SDRI Infiltration Rings has a diameters of 5 foot x 5 foot and a overall height of 11 inches tall at its highest point.

Click image to enlarge Turf-Tec IN15-W SDRI Infiltration Rings

The inner ring of the IN15-W Turf-Tec SDRI Infiltration Rings has a diameters of 5 foot x 5 foot and a overall height of 11 inches tall at its highest point.

This method of testing is useful for field measurement of the infiltration rate of soils. This test method is useful for measuring liquid flow through soil moisture barriers such as compacted clay liner or covers used at waste disposal facilities, for canal and reservoir liners, for seepage blankets, and for amended soil liners such as those used for retention ponds or storage tanks. It is also useful in determining if a spill occurs, how the soil around the area will react. This test method is government approved and matches ASTM Standards.

Digging trench for center five foot Turf-Tec SDRI Infiltration ring installation.  The purpose of the double ring is to insure the downward flow of movement of water to insure proper measurements.  These infiltration rings are ideal for taking ASTM infiltration tests on all areas and match the ASTM 5093 test.Digging trench for center five foot Turf-Tec SDRI Infiltration ring installation. Installing outer SDRI 12 foot Turf-Tec Infiltration ring. The purpose of the double ring is to insure the downward flow of movement of water to insure proper measurements.  These infiltration rings are ideal for taking ASTM infiltration tests on all areas and match the ASTM 5093 test.Installing the outer 12 foot SDRI Turf-Tec Infiltration ring. Completed installation of the SDRI Turf-Tec Infiltration rings and filling rings to begin testing.  The purpose of the double ring is to insure the downward flow of movement of water to insure proper measurements.  These infiltration rings are ideal for taking ASTM infiltration tests on all areas and match the ASTM 5093 test.Completed installation of  Turf-Tec SDRI Infiltration rings and filling rings to begin testing.

Check Infiltration on:

  • Soil moisture barriers

  • Compacted clay liners

  • Soil Barrier testing

  • Covers used at waste disposal facilities

  • Waste Management - Final Covers

  • In-Situ TestingAssembly of the outer ring of the IN15-W Turf-Tec SDRI Infiltration Rings

  • Canal Liners

  • Reservoir liners

  • Seepage blankets

  • Amended soil liners

  • Retention ponds

  • Storage tanks

Specifications:

  • Inner tank dimensions 60 X 60 X 11 inches
  • Inner Tank constructed from 14 Gauge steel (.07 inches thick)
  • Inner Tank has 2 ports, one for vent cap and one brass ball valve for flexible bag inlet
  • Inner tank has 4 handles to aid in insertion
  • Outer Tank constructed from .125 inches thick Aluminum (3mm.thick)
  • Outer tank dimensions 12 feet X 36 inches tall
  • Outer tank walls bolt together with 3/8 inch bolts and rubber gaskets
  • Set comes with 2- 3000 ML flexible supply bag, clamps and brass shut off valve, hose to connect flexible bag to inner ring and rubber splash guard
  • Inner ring is painted to insure long life and rust resistance
  • Outer ring is constructed from 100% Aluminum
  • All Specification meet or exceed ASTM Standard D 5093-02

 IN15-W - Turf-Tec International 5 and 12 foot Infiltration Rings*
* Please allow 2-3 weeks for shipment of IN15-W

Click here to see this item in the on-line catalog.

Click here to order this product.


See our other infiltration devices:

IN2-W Turf-Tec Infiltrometer. Turf-Tec Infiltrometer - A device for measuring infiltration rates directly on the turfgrass area. IN14-W - Turf-Tec Heavy Duty 12 and 24 Inch Diameters ASTM Infiltration Rings for ASTM 3385 IN14-W - Turf-Tec Heavy Duty 12 and 24 Inch Diameters ASTM Infiltration Rings for ASTM 3385
IN7-W Turf-Tec 6 and 12 inch Heavy Duty Infiltration Rings. Infiltration Rings Heavy Duty - A diagnostic tool for measuring infiltration rates of hard soils 6 inch and 12 inch diameter. IN11-W - Turf-Tec Driving Plates for
Turf-Tec 12 and 24 inch Infiltration Rings
IN11-W - Turf-Tec Driving Plates for Turf-Tec 12 and 24 inch Infiltration Rings
IN8-W Turf-Tec Heavy Duty Tall Infiltration Rings (OR) - IN8P-W (with Port for Mariotte Tube) IN8-W  - Turf-Tec Heavy Duty Tall Infiltration Rings - The new Turf-Tec Heavy Duty Tall Infiltration Rings allow the field infiltration rates to be measured. This tool conforms to the new 2006 Pennsylvania Stormwater Best Management Practices Manual. IN12-W Turf-Tec Mariotte Tubes for IN10-W 12 & 24 Inch Rings for ASTM 3385. Mariotte Tubes for Infiltration rings 12 & 24 Inch - Keeps constant head of water for ASTM Standards.
IN6-W Turf-Tec Driving Plate for IN5-W, IN7-W or IN8-W IN6-W - Turf-Tec Driving Plates for all Turf-Tec 6 and 12 inch Infiltration Rings - To aid in hammering or pressing the infiltration rings into the soil. IN13-W - Turf-Tec International Large Volume Mariotte Tubes IN13-W - Turf-Tec International Large Volume Mariotte Tubes
IN10-W Turf-Tec 12 inch and 24 inch ASTM 3385 Infiltration Rings.  Infiltration Rings 12 and 24 Inch - These infiltration rings match ASTM standards. IN15-W Turf-Tec 5 foot and 12 foot ASTM 5093 Infiltration Rings. Turf-Tec Infiltration Rings 5 & 12 feet diameter for ASTM 5093 Test

Turf-Tec International

1471 Capital Circle NW, Suite # 13
Tallahassee, FL. 32303
Order Line (800) 258-7477
Phone (850) 580-4026
Fax (850) 580-4027

Click here to search Turf-Tec Intrenational Site

Home / Search Site / Catalog / Online Ordering / Map of site / Newsletter / On line consult / Contact us
History / Web Designs / Request Catalog / Search Engines

Copyright 2011 - Patent Pending